technical data sheet cable assembly rpc-1.00 jack / plug ? rtk 055 l70-287-xxx rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 1 dieses dokument ist urheb errechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/09.14/6.2 all dimensions are in mm; tolerances: 3mm for a 300 mm; 1% for a > 300 mm available variants type max. insertion loss weight (g) / pce l70-287-xxx 0.0018 * f[ghz] db/mm 0.0049 g/mm * a mm + 6.2 g xxx ? length in mm = a maximum possible length = 25 0mm note: weight: first constant = cable- and armour- weight per mm; second constant = connector left and connector rig ht weight per pce assembly parts connector left rpc-1.00 jack connector right rpc-1.00 plug cable rtk 055 armour none electrical data impedance 50 w frequency dc to 110 ghz return loss 3 17 db, dc to 50 ghz 3 14 db, 50 to 110 ghz insertion loss see table available variants individual testing and documentation: measurement plot with all 4 s-parameters (s11; s22; s21; s12) is included with the cable assembly and on the backside the care and handling instruction is p rinted. mechanical data minimum bend radius static 3.2 mm minimum bend radius dynamic 25.4 mm environmental data operating temperature range 1 +20 c to +26 c rated temperature range of use 2 0 c to +50 c storage temperature range - 40 c to +85 c rohs compliant 1 temperature range over which these specifications a re valid. 2 this range is underneath and above the operating te mperature range, within the cable assembly is fully functional and could be used without damage draft date approved date rev. engineering change n umber name date martin moder 10.06.15 ronny mark 22.02.17 a00 17-0 197 marcel panicke 22.02.17 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
